Raw Materials for small kitchen appliances brands in Ahmedabad

Small self-tapping and machine screws for plastic housings and PCBs.

Self-stick feet for speakers, chargers, keyboards and appliances. Stops sliding.

Steel stencil made from your PCB files for printing solder paste before SMT assembly.

A small lot of boards to test your design before mass production. Up to 100 × 100 mm.

Soft tinned-copper wire for battery packs, heaters, motors and internal wiring.

Multi-way flat cable for joining boards inside keyboards, displays and appliances.

Shrinks over joints and cells with a heat gun for insulation and a neat finish.

Metal threads for plastic housings so screws can be opened and closed many times.

Snap-disc thermostat that cuts power when hot. For irons, kettles, dryers and heaters.

Low-cost boards for chargers, LED drivers and simple circuits. Price per board up to 100 × 100 mm.

Standard 2-layer boards for most gadgets. Price per board up to 100 × 100 mm.

Stainless steel blade with coupler and bearing for mixer jars and blenders.

Mains cord with moulded Indian 2-pin plug for appliances, chargers and lamps.

Flat heating plate with connector for electric kettles and tea makers.

Brushless motor for table fans, hair dryers, air purifiers and handheld fans.

Heating wire and mica-wound elements for hair dryers, straighteners and air fryers.

Copper-wound universal motor for mixer grinders, juicers and food processors.

Moulded silicone buttons for remotes, appliances and toys. Printed icons, carbon contacts.

Simple text LCD with backlight for appliances, chargers, meters and DIY kits.

Common passives on reels or in kits for PCB assembly and prototypes.

Click button for power, volume and reset on almost every gadget.

Protects mains appliances and adapters from overload and short circuit.

Beeper for kettles, trimmers, alarms and toys. Active (built-in driver) or passive.

Small board that stops over-charge, over-discharge and short circuit. USB-C charging option.

Linear charger chip that charges a 3.7 V cell safely from USB. Used in almost every gadget.

Digital sensor for smart thermostats, air purifiers, weather displays and kitchen gadgets.

Cylindrical 3.7 V cells for power banks, speakers, trimmers and torches. Capacity-tested lots.

Battery management board for 7.4–14.8 V packs in blenders, speakers, lamps and tools.

Pre-certified module for smart plugs, bulbs and sensors. Works with common app platforms.

General-purpose chip that runs your product firmware. Good for appliances and gadgets.

Wall adapter for LED strips, routers, cameras, speakers and small appliances.

Bare mains-to-DC power board that fits inside appliances, smart switches and lamps.

Bigger 3.7 V cells for high-power blenders, hair dryers, fans and large power banks.

Cells spot-welded with BMS, thermistor, wires and connector, shrink-wrapped to your size.