Raw Materials for factory & plant maintenance in Chennai

Common bearing for motors, pumps, conveyors and fans. Pre-greased if sealed.

Cast-iron housing with insert bearing, ready to bolt on. For shafts and conveyors.

Rubber V-belts for motors, pumps, compressors and machines. Sized by belt number.

Takes heavy and side loads. For gearboxes, wheels and spindles.

Steel roller chain for conveyors and drives. Comes with a connecting link.

Joins motor and pump shafts and takes small misalignment. Spare spiders sold too.

Keeps oil in and dust out on shafts of gearboxes, pumps and motors.

Insulated ferrules and lugs for neat terminations in panels, DCDBs and controllers. Pack of 1000.

Toothed belt for exact speed drives in CNC, printing and packing machines.

Steel sprocket with a small bore for you to machine to your shaft.

Threaded metal connectors for sensors, motors and panel wiring. 2–8 pins, panel plug + socket pair.

Grey cast-iron pulley, balanced, with pilot or taper-lock bore.

1 mm thin wheel for angle grinders. Fast, clean cuts in steel and SS.

6 mm thick wheel for weld grinding and heavy stock removal.

Grinds and finishes welds in one step. Lasts longer than plain wheels on SS.

Ground HSS drills for steel, cast iron and brass. Box of 10 of one size.

Machine tap that pushes chips ahead. For through-holes on drill or VMC.

Flexible cloth-backed roll for hand finishing metal and wood. 50 m roll.

Plain and spring washers sold by weight to go with your bolts.

Joins sheet metal from one side. Steel mandrel, dome head.

Light knit gloves with PU palm for assembly, packing and small parts.

Nitrile dipped palm for oily parts, machining and maintenance work.

Polycarbonate goggles that guard eyes from chips, dust and splashes.

Folding dust mask with exhale valve for grinding, sanding and dusty work.

Soft PU foam plugs on a cord for noisy press shops and saw areas.

Hi-vis mesh vest with reflective tape for stores, loading bays and plant roads.

Mix 1:20 with water for turning, drilling and milling. Cools and stops rust.

Anti-wear hydraulic oil for moulding machines, presses and power packs.

Extreme-pressure oil for enclosed gearboxes and worm drives.

All-purpose grease for bearings, slides and couplings. Water resistant.

Tacky oil for machine guideways. Stops stick-slip on lathes and VMCs.

For reciprocating air compressors in plants and workshops. Low carbon build-up.

Thin film that keeps machined parts rust-free in storage and transit.

Loosens rusted bolts, drives out moisture and lightly lubricates. Unbranded can.

Strong bolts for machines and structures. Grade mark on the head.

Matching nuts for 8.8 bolts. Full thread, clean tapping.

Socket head screws for dies, jigs and machine assembly.

Nuts with a nylon ring that stop loosening from vibration.

Drills and taps in one go into sheet up to 5 mm. EPDM washer seals out water.

Full-thread studding for foundation bolts, hangers and fixtures. Cut to length.

HPPE gloves with PU palm for handling sheet metal, glass and blades.

Split-leather gloves with long cuffs that guard hands from heat and spatter.

HDPE helmet with ratchet fit and chin strap. Choose a maker with IS 2925 marking.

Reusable rubber mask with two filters for paint, solvent fumes or dust.

Cold-drawn EN8 bar with a smooth finish for shafts, pins and turned parts.

Hot-rolled E250 plate for bases, brackets and structures. Mill test certificate on request.

Welded hollow sections for frames, trolleys, racks and gates.

Rolled steel angles and channels for frames, stands and machine bases.

General-purpose rods for MS fabrication. Smooth arc, easy slag removal.

Snap-on plastic housing for controllers and relays that sit in electrical panels next to MCBs.

Rust-free fasteners for food machines, outdoor and wet areas.

Leather upper, steel toe cap and oil-resistant PU sole. IS 15298 marked lots available.

Zinc-coated sheet for ducts, trays and outdoor boxes. Resists rust without paint.

Bright SS bar for food-machine shafts, pins and fittings.

For strong, crack-free welds on structures and pressure parts. Keep in a dryer.

Rods for welding SS 304 and 316 sheets, pipes and tanks.

For gas brazing of steel, copper and cast iron. Flux already on the rod.

Fine-strand copper cable with rubber sheath for welding machine leads.