Raw Materials for sheet metal & fabrication units in Chennai

1 mm thin wheel for angle grinders. Fast, clean cuts in steel and SS.

6 mm thick wheel for weld grinding and heavy stock removal.

Grinds and finishes welds in one step. Lasts longer than plain wheels on SS.

Ground HSS drills for steel, cast iron and brass. Box of 10 of one size.

Plain and spring washers sold by weight to go with your bolts.

Joins sheet metal from one side. Steel mandrel, dome head.

Light knit gloves with PU palm for assembly, packing and small parts.

Polycarbonate goggles that guard eyes from chips, dust and splashes.

Folding dust mask with exhale valve for grinding, sanding and dusty work.

Anti-wear hydraulic oil for moulding machines, presses and power packs.

All-purpose grease for bearings, slides and couplings. Water resistant.

Thin film that keeps machined parts rust-free in storage and transit.

Loosens rusted bolts, drives out moisture and lightly lubricates. Unbranded can.

Welded to your length for metal-cutting band saws. Cuts MS, SS and pipes.

Strong bolts for machines and structures. Grade mark on the head.

Matching nuts for 8.8 bolts. Full thread, clean tapping.

Nuts with a nylon ring that stop loosening from vibration.

Drills and taps in one go into sheet up to 5 mm. EPDM washer seals out water.

Gives a strong thread in thin sheet or tube. Fit with a rivet-nut tool.

Full-thread studding for foundation bolts, hangers and fixtures. Cut to length.

HPPE gloves with PU palm for handling sheet metal, glass and blades.

Split-leather gloves with long cuffs that guard hands from heat and spatter.

HDPE helmet with ratchet fit and chin strap. Choose a maker with IS 2925 marking.

Lens darkens on its own when the arc strikes. Shade 9-13, solar plus battery.

Hot-rolled E250 plate for bases, brackets and structures. Mill test certificate on request.

Smooth, flat sheet for panels, enclosures and press parts that get painted.

Welded hollow sections for frames, trolleys, racks and gates.

Rolled steel angles and channels for frames, stands and machine bases.

General-purpose rods for MS fabrication. Smooth arc, easy slag removal.

Copper-coated wire for CO2 and MIG welding of mild steel.

Copper contact tips and gas nozzles for standard 36 kA MIG torches.

Stops weld spatter sticking to jobs, jigs and torch nozzles. Silicone-free.

Rust-free fasteners for food machines, outdoor and wet areas.

Leather upper, steel toe cap and oil-resistant PU sole. IS 15298 marked lots available.

Zinc-coated sheet for ducts, trays and outdoor boxes. Resists rust without paint.

Food-safe, rust-free SS sheet for kitchen equipment, panels and covers.

Light, strong plate that machines well. For jigs, fixtures and mould bases.

For strong, crack-free welds on structures and pressure parts. Keep in a dryer.

Rods for welding SS 304 and 316 sheets, pipes and tanks.

1 m cut lengths for TIG welding stainless steel. Sold by the kg.

175 mm tungsten rods. Box of 10. Pick type by metal and machine.

For gas brazing of steel, copper and cast iron. Flux already on the rod.

Fine-strand copper cable with rubber sheath for welding machine leads.