Raw Materials for computer & gaming accessories brands in India

Steel stencil made from your PCB files for printing solder paste before SMT assembly.

Common passives on reels or in kits for PCB assembly and prototypes.

Click button for power, volume and reset on almost every gadget.

Small self-tapping and machine screws for plastic housings and PCBs.

Self-stick feet for speakers, chargers, keyboards and appliances. Stops sliding.

Flexible LED strip with 3M backing for decor, cove, TV backlight and shelf lighting.

USB Type-C socket for charging and data on power banks, earbuds cases and gadgets.

A small lot of boards to test your design before mass production. Up to 100 × 100 mm.

Soft tinned-copper wire for battery packs, heaters, motors and internal wiring.

Multi-way flat cable for joining boards inside keyboards, displays and appliances.

Shrinks over joints and cells with a heat gun for insulation and a neat finish.

Each LED can be set to any colour. For gaming setups, music-sync and smart decor lights.

Sharp, low-power OLED for wearables, smart devices, power banks and gadgets.

Ready plastic box for gadgets, chargers, sensors and control boards. Cut-outs on request.

Metal threads for plastic housings so screws can be opened and closed many times.

Extruded or stamped heatsinks for LED boards, chargers, amplifiers and SSDs.

Linear charger chip that charges a 3.7 V cell safely from USB. Used in almost every gadget.

Flat 8–12 mm vibration motor for smartwatches, massagers, game controllers and toys.

Low-cost boards for chargers, LED drivers and simple circuits. Price per board up to 100 × 100 mm.

Small round speaker for Bluetooth speakers, toys, smart plugs and voice prompts.

Low-cost mic capsule for earphones, neckbands, doorbells and voice remotes.

Standard 2-layer boards for most gadgets. Price per board up to 100 × 100 mm.

Wall adapter for LED strips, routers, cameras, speakers and small appliances.

Ready module for speakers, neckbands and soundbars. Plays music and handles calls.

Pre-certified module for smart plugs, bulbs and sensors. Works with common app platforms.

Coin-cell friendly module for trackers, wearables, wireless mice and remotes.

Fast-charge protocol chip for USB-C chargers, power banks and car chargers.

General-purpose chip that runs your product firmware. Good for appliances and gadgets.

Counts steps, detects wrist raise and tilt. For watches, bands, game controllers and toys.

Thin 3.7 V pouch cells with leads for earbuds, smartwatches, trackers and small toys.

Flat 3.7 V cells for slim power banks, speakers, wireless mice and LED lamps.

Full-range woofer driver with rubber surround for portable and party speakers.

Plain charge + data cables ready for your packaging. E-marker option for 100 W.

Everyday charging cable to pack with earbuds, trimmers, speakers and power banks.

Mains cord with moulded Indian 2-pin plug for appliances, chargers and lamps.

Coil + board to build wireless charging pads, stands and 3-in-1 docks.

Dense boards for Wi-Fi, Bluetooth and MCU products. Price depends on size and layer count.

Bendable circuits for smartwatches, earbuds and hinged products. Made to your drawing.

Small, cool-running charger for laptops, tablets and phones at the same time.

Moulded silicone buttons for remotes, appliances and toys. Printed icons, carbon contacts.