Equipment & Tools for iot & hardware startups in India

Powers and connects IP cameras over one Cat6 cable. 802.3af/at with gigabit uplinks.

Enclosed 12 V supply with fused outputs to power 4–16 cameras from one box.

60–90 W station with digital display, ESD-safe handle, stand and sponge. Fast heat-up for daily use.

Eutectic tin-lead solder with rosin core for clean, shiny joints. Not for RoHS products.

Tacky flux for BGA, chip and SMD rework. Low residue, no washing needed.

Copper braid wick and a spring solder sucker to clear pads and through-holes.

19-inch rack with glass door, fan and shelf for NVRs, switches and patch panels.

Pre-paired point-to-point radios to link cameras across yards, gates and buildings without cable.

Digital hot air station with nozzles for removing chips, connectors and shields. 2-in-1 with iron option.

RoHS solder for products you sell or export. Needs a hotter iron than tin-lead.

Adjustable supply with current limit to power boards safely while testing and repairing.

Two-layer anti-static rubber mat with ground cord and wrist strap to protect boards from static.

Charges and balances 1–6S LiPo, Li-ion and LiFePO4 packs with storage mode and cell meter.

Binocular or trinocular zoom microscope with LED ring light for chip-level repair and inspection.

Bench scope with colour screen, USB and protocol decode to debug power, PWM and data lines.