Raw Materials for solar installers & epcs in India

Insulated ferrules and lugs for neat terminations in panels, DCDBs and controllers. Pack of 1000.

Hall-effect or shunt-type breakouts to log current, voltage and power in batteries, solar and motors.

Seal cable entries into enclosures, junction boxes and DCDBs. Includes lock nuts.

IP67 DC plugs for 4–6 sq mm solar cable. Branch connectors for parallel strings available.

Tinned copper, double-insulated, UV and heat-proof cable for strings. Red and black, per metre.

Interlocking screw terminals for power and sensor wires on PCBs. Rated 300 V, 16 A.

Gasketed box with stainless screws for outdoor sensors, gateways and camera power. Grey or clear lid.

DIN-rail SPD guards inverters from lightning surges on PV strings. Plug-in cartridges.

2-pole DC breakers and gPV fuse holders to isolate and protect each string.

Multi-spike copper air terminal with mast and base for roof solar plants. Earth separately.

Telescopic aluminium pole up to 6 m with soft brush, wiper and hose adapter for monthly panel cleaning.

Snap-on plastic housing for controllers and relays that sit in electrical panels next to MCBs.

Pre-wired DC and AC boxes with SPD, MCB and fuses, in IP65 enclosures. Sized by kW and strings.

CT-based meter and limiter that stops solar feeding the grid where export is not allowed. Logs kWh.

Charges batteries from panels with 15–25% more energy than PWM. LCD with load control.

Anodised aluminium case with slide-in PCB rails and end plates. Strong, shields noise, sheds heat.

12 V panels for streetlights, pumps, cameras, fencing and kits. Price shown for 100 Wp.

Grid-tie inverter with Wi-Fi monitoring and dual MPPT, BIS-registered models. Price shown for 5 kW.

Pure sine inverter with built-in MPPT for homes, shops and farms without reliable grid.

Deep-cycle tall tubular battery for off-grid and backup solar. Price shown for 150 Ah.

Mini-rails or long rails with mid and end clamps, EPDM pads and SS fasteners for tin sheds.

144 half-cut cell module on ALMM-listed makers. DCR version for subsidy rooftops. Price per panel.

Runs grid, solar and battery together with backup on outage. Works with lithium or lead-acid.

Elevated or flush structure for RCC roofs, hot-dip galvanised to IS 4759. Designed for local wind speed.

Glass-glass bifacial module with higher output on bright roofs and ground mounts. ALMM-listed makers.

Wall or rack lithium battery with BMS and CAN/RS485 for hybrid inverters. 6000+ cycles.