Raw Materials for toys & games brands in India

Bright LEDs for light-up toys.

Steel stencil made from your PCB files for printing solder paste before SMT assembly.

1.5V, BIS certified. Test report per batch.

1.5V, BIS certified.

Common passives on reels or in kits for PCB assembly and prototypes.

Click button for power, volume and reset on almost every gadget.

On/off slide switch for toys, torches, trimmers and battery gadgets.

Small self-tapping and machine screws for plastic housings and PCBs.

Light, food-safe plastic for toy parts, caps and baby utensils.

Strong, flexible plastic for blow-moulded toys, balls and containers.

Low-pile, budget plush fabric for soft toy bodies. 60 inch wide.

Clean, bouncy stuffing for soft toys and cushions. Does not clump.

Soft felt for toy faces, quiet books and craft kits.

Lock-in eyes and noses with washers. Pack of 100. Use embroidery for under 3s.

Small plastic pellets that give soft toys a weighted, floppy feel. Use in inner bags.

Sealed rattle boxes and squeakers you stitch inside soft toys.

Flat, easy-cut board for puzzles and toy panels. 8 × 4 ft sheet.

All-purpose sewing thread for garments and bags. 5,000 m cone, 300+ shades.

For small toys and gadgets.

Unfinished or waxed wooden beads for bag straps, macrame and kids jewellery.

Simple text LCD with backlight for appliances, chargers, meters and DIY kits.

Thin copper or silver wire string lights for festive decor, gift boxes and jars.

USB Type-C socket for charging and data on power banks, earbuds cases and gadgets.

Small plug-and-socket connectors for batteries, speakers and displays inside a product.

Plastic holders with wires or pins for AA, AAA and coin cells. With or without switch.

Small board that stops over-charge, over-discharge and short circuit. USB-C charging option.

A small lot of boards to test your design before mass production. Up to 100 × 100 mm.

Tough, glossy plastic for toy parts, building blocks and housings.

Concentrated colour pellets. Mix 1–3% with natural resin for bright parts.

Soft foam sheets for puzzle mats, craft kits and cut-out toys. 1 × 1 m.

Beeper for kettles, trimmers, alarms and toys. Active (built-in driver) or passive.

Very soft short-pile fabric for soft toys and baby blankets. 60 inch wide.

Fluffy long-pile fur for teddy bears, manes and cushions.

Light softwood for toy furniture, crates and ride-ons.

Lead-free paint that meets toy safety limits. Brush or spray.

Non-toxic clear coat that seals wood and keeps toys easy to wipe.

Soft tinned-copper wire for battery packs, heaters, motors and internal wiring.

Shrinks over joints and cells with a heat gun for insulation and a neat finish.

3–6V motor for moving toys.

Strong N35–N52 magnets for magnetic chargers, cases, closures and speaker parts.

Linear charger chip that charges a 3.7 V cell safely from USB. Used in almost every gadget.

Cylindrical 3.7 V cells for power banks, speakers, trimmers and torches. Capacity-tested lots.

Battery management board for 7.4–14.8 V packs in blenders, speakers, lamps and tools.

Flat 8–12 mm vibration motor for smartwatches, massagers, game controllers and toys.

Tiny metal gearbox motor for smart locks, curtain openers, toys and robots.

Low-cost boards for chargers, LED drivers and simple circuits. Price per board up to 100 × 100 mm.

Soft, safe silicone for teethers, baby spoons and squishy toys.

Rubber-like, phthalate-free plastic for bath toys, grips and squeeze toys.

Small round speaker for Bluetooth speakers, toys, smart plugs and voice prompts.

Breathable organic muslin for swaddles, bibs, soft toys and clothing.

Smooth, light hardwood. Most wooden toys and puzzles use it.

Lac sticks pressed on the lathe to give toys a glossy, safe finish.

Clean, void-free plywood for laser-cut puzzles and STEM kits. 8 × 4 ft.

Warm blend yarn for sweaters, caps and scarves. Ludhiana spun, hank or cone.

Low-cost charging cable for toys, torches, speakers and older gadgets.

Standard 2-layer boards for most gadgets. Price per board up to 100 × 100 mm.

Basic USB charger to bundle with trimmers, speakers, lamps and toys.

Ready module for speakers, neckbands and soundbars. Plays music and handles calls.

Coin-cell friendly module for trackers, wearables, wireless mice and remotes.

General-purpose chip that runs your product firmware. Good for appliances and gadgets.

Counts steps, detects wrist raise and tilt. For watches, bands, game controllers and toys.

Thin 3.7 V pouch cells with leads for earbuds, smartwatches, trackers and small toys.

Plant-based plastic for eco toys and 3D printing. Made from corn starch.

Damask woven labels with your logo for necks and hems. Sample in 5 days.

Kiln-dried neem wood for teethers, combs and small toys.

Soft, pale wood used for turned and lacquered Channapatna toys.

Everyday charging cable to pack with earbuds, trimmers, speakers and power banks.

10-second sound chip with speaker. Custom sounds.

Cells spot-welded with BMS, thermistor, wires and connector, shrink-wrapped to your size.

Moulded silicone buttons for remotes, appliances and toys. Printed icons, carbon contacts.