Raw Materials for smart home & iot brands in Kolkata

Steel stencil made from your PCB files for printing solder paste before SMT assembly.

Common passives on reels or in kits for PCB assembly and prototypes.

Click button for power, volume and reset on almost every gadget.

Protects mains appliances and adapters from overload and short circuit.

Small self-tapping and machine screws for plastic housings and PCBs.

Self-stick feet for speakers, chargers, keyboards and appliances. Stops sliding.

Surface-mount LED chips on reels for bulbs, strips, panels and indicator lights.

Flexible LED strip with 3M backing for decor, cove, TV backlight and shelf lighting.

Simple text LCD with backlight for appliances, chargers, meters and DIY kits.

USB Type-C socket for charging and data on power banks, earbuds cases and gadgets.

Small plug-and-socket connectors for batteries, speakers and displays inside a product.

Plastic holders with wires or pins for AA, AAA and coin cells. With or without switch.

A small lot of boards to test your design before mass production. Up to 100 × 100 mm.

Beeper for kettles, trimmers, alarms and toys. Active (built-in driver) or passive.

Soft tinned-copper wire for battery packs, heaters, motors and internal wiring.

Multi-way flat cable for joining boards inside keyboards, displays and appliances.

Shrinks over joints and cells with a heat gun for insulation and a neat finish.

Chip-on-board LED for spotlights, downlights, torches and ring lights.

Each LED can be set to any colour. For gaming setups, music-sync and smart decor lights.

Mains-to-LED driver for bulbs, panels and downlights. Isolated or non-isolated.

Sharp, low-power OLED for wearables, smart devices, power banks and gadgets.

Ready plastic box for gadgets, chargers, sensors and control boards. Cut-outs on request.

Metal threads for plastic housings so screws can be opened and closed many times.

Linear charger chip that charges a 3.7 V cell safely from USB. Used in almost every gadget.

Digital sensor for smart thermostats, air purifiers, weather displays and kitchen gadgets.

Detects people moving. For motion lights, smart security and auto-on night lamps.

Cylindrical 3.7 V cells for power banks, speakers, trimmers and torches. Capacity-tested lots.

Battery management board for 7.4–14.8 V packs in blenders, speakers, lamps and tools.

Snap-disc thermostat that cuts power when hot. For irons, kettles, dryers and heaters.

Tiny metal gearbox motor for smart locks, curtain openers, toys and robots.

Low-cost boards for chargers, LED drivers and simple circuits. Price per board up to 100 × 100 mm.

Small round speaker for Bluetooth speakers, toys, smart plugs and voice prompts.

Low-cost mic capsule for earphones, neckbands, doorbells and voice remotes.

Standard 2-layer boards for most gadgets. Price per board up to 100 × 100 mm.

Metal-core boards that pull heat away from LEDs in bulbs, battens and flood lights.

Wall adapter for LED strips, routers, cameras, speakers and small appliances.

Basic USB charger to bundle with trimmers, speakers, lamps and toys.

Bare mains-to-DC power board that fits inside appliances, smart switches and lamps.

Ready module for speakers, neckbands and soundbars. Plays music and handles calls.

Pre-certified module for smart plugs, bulbs and sensors. Works with common app platforms.

Coin-cell friendly module for trackers, wearables, wireless mice and remotes.

General-purpose chip that runs your product firmware. Good for appliances and gadgets.

Counts steps, detects wrist raise and tilt. For watches, bands, game controllers and toys.

Thin 3.7 V pouch cells with leads for earbuds, smartwatches, trackers and small toys.

Flat 3.7 V cells for slim power banks, speakers, wireless mice and LED lamps.

Coil + board to build wireless charging pads, stands and 3-in-1 docks.

Round aluminium LED board with driver-on-board plus bulb housing and diffuser, for B22/E27 bulbs.

Dense boards for Wi-Fi, Bluetooth and MCU products. Price depends on size and layer count.

Long-life, safer cells for portable power stations, solar lights and backup units.

Brushless motor for table fans, hair dryers, air purifiers and handheld fans.

Cells spot-welded with BMS, thermistor, wires and connector, shrink-wrapped to your size.

Moulded silicone buttons for remotes, appliances and toys. Printed icons, carbon contacts.