Raw Materials for led lighting brands in Pune

Surface-mount LED chips on reels for bulbs, strips, panels and indicator lights.

Flexible LED strip with 3M backing for decor, cove, TV backlight and shelf lighting.

Thin copper or silver wire string lights for festive decor, gift boxes and jars.

Common passives on reels or in kits for PCB assembly and prototypes.

On/off slide switch for toys, torches, trimmers and battery gadgets.

Protects mains appliances and adapters from overload and short circuit.

USB Type-C socket for charging and data on power banks, earbuds cases and gadgets.

Small plug-and-socket connectors for batteries, speakers and displays inside a product.

Plastic holders with wires or pins for AA, AAA and coin cells. With or without switch.

Small board that stops over-charge, over-discharge and short circuit. USB-C charging option.

Chip-on-board LED for spotlights, downlights, torches and ring lights.

Each LED can be set to any colour. For gaming setups, music-sync and smart decor lights.

Mains-to-LED driver for bulbs, panels and downlights. Isolated or non-isolated.

Linear charger chip that charges a 3.7 V cell safely from USB. Used in almost every gadget.

Detects people moving. For motion lights, smart security and auto-on night lamps.

Cylindrical 3.7 V cells for power banks, speakers, trimmers and torches. Capacity-tested lots.

Battery management board for 7.4–14.8 V packs in blenders, speakers, lamps and tools.

Pre-certified module for smart plugs, bulbs and sensors. Works with common app platforms.

General-purpose chip that runs your product firmware. Good for appliances and gadgets.

Bigger 3.7 V cells for high-power blenders, hair dryers, fans and large power banks.

Flat 3.7 V cells for slim power banks, speakers, wireless mice and LED lamps.

Round aluminium LED board with driver-on-board plus bulb housing and diffuser, for B22/E27 bulbs.

Long-life, safer cells for portable power stations, solar lights and backup units.

Cells spot-welded with BMS, thermistor, wires and connector, shrink-wrapped to your size.

Steel stencil made from your PCB files for printing solder paste before SMT assembly.

Soft tinned-copper wire for battery packs, heaters, motors and internal wiring.

Multi-way flat cable for joining boards inside keyboards, displays and appliances.

Shrinks over joints and cells with a heat gun for insulation and a neat finish.

A small lot of boards to test your design before mass production. Up to 100 × 100 mm.

Ready plastic box for gadgets, chargers, sensors and control boards. Cut-outs on request.

Extruded or stamped heatsinks for LED boards, chargers, amplifiers and SSDs.

Low-cost charging cable for toys, torches, speakers and older gadgets.

Low-cost boards for chargers, LED drivers and simple circuits. Price per board up to 100 × 100 mm.

Standard 2-layer boards for most gadgets. Price per board up to 100 × 100 mm.

Metal-core boards that pull heat away from LEDs in bulbs, battens and flood lights.

Everyday charging cable to pack with earbuds, trimmers, speakers and power banks.

Mains cord with moulded Indian 2-pin plug for appliances, chargers and lamps.

Wall adapter for LED strips, routers, cameras, speakers and small appliances.

Basic USB charger to bundle with trimmers, speakers, lamps and toys.

Bare mains-to-DC power board that fits inside appliances, smart switches and lamps.